Ditec Valor HH-HS

Ditec Valor HH-HS
Ditec Valor HH-HS
Ditec Valor HH-HS
Ditec Valor HH-HS
Ditec Valor HH-HS
Ditec Valor HH-HS
Ditec Valor HH-HS
Ditec Valor HH-HS
Ditec Valor HH
Ditec Valor HH

THE UTMOST BENEFITS OF ADVANCED TECHNOLOGY

 

Ditec Valor HH is an automation system for doors with hermetic closure on all 4 sides; as it closes, the wing moves vertically and horizontally to press against the seals along the entire perimeter of the frame and along the floor.

Ditec Valor HS is an automation system for doors with hermetic vertical closure and semi-hermetic horizontal closure: the wing provides a partial seal, abutting on the uprights of the frame and touching the crosspiece of the floor.  

Super silent operation

All versions feature super silent operation, thanks to the anti-vibration seals, making them ideal for environments where comfort, silence and a warm welcome are indispensable and fundamental requirements.

Maximum hygiene

The rounded guard and the screwless visible heads prevent dust from building up, making cleaning easy. Electrostatic energy that may have accumulated on the moving wings is permanently discharged, thus avoiding the build-up of dust too. Automatic doors must guarantee freedom of movement in absolute hygiene and safety both for patients and healthcare workers, without coming into manual contact with the  actual doors.

The entire range accommodates these needs fully.

Maximum safety

The motion detectors can be built into the automation and concealed. Consequently, they prevent the classic build-up of dust on elements outside the guard.

They also ensure protection not only in the doorway but also in the side opening movement of the wings, preventing accidental impact with unforeseen obstacles. They are indispensable when stretchers and wheelchairs are passing and may not be detected by traditional photocells.

Maximum capacity

The HS version fully satisfies the requirements of the radiologic sector, where wings are moved which are shielded against X-rays with lead protection that determine significant weight.

Maximum availability of finishes

Ditec Valor HS and Ditec Valor HH automatic entrances are available in all RAL colours, in anodised finishes (from natural silver to polished titanium) with panels surfaced in HPL laminate in the Abet/Print range of colours.

Ditec Valor HS and Ditec Valor HH can also be equipped  with AISI 304 stainless steel guards and wings in scotch brite finish.

Accessories

Ditec Valor HH-HS accessories are easy to choose:

 

SPKVALHS2RC: surcharge for 2nd additional wheel kit,
assembled to increase weight up to 300 kg for single wing or 360 kg for double wing
SPKVALHSCLS: surcharge for 3rd runner kit, assembled to increase weight up to 450 for single wing or 500 kg for double wing
SPVALHSLOK: wing stop device complete with brackets
LOKSBM: manual release device
SPVALHHFM: magnetic mechanical stop for interlock
SPKVALHHT2: earth kit for 1 or 2 wings
SPVALHHABC: antipanic system with back-up battery
SPVALHHABE: antipanic system with emergency battery
SPPASAT3IH: detection safety sensor built in the cover
SPMP1: Plus Module Board mounted on automation

 

For other generic accessories please consult the dedicated section.

Controls

Programming

Sensors and detection devices

Software

Interested in this product?

Contact us