Receivers and receiver cards

Entrematic receivers receiver cards
Entrematic receivers receiver cards
Entrematic receivers receiver cards
Entrematic receivers receiver cards

Entrematic offers a complete range of receivers suitable for any use and for frequencies of 433.92 MHz and 868.35 MHz.

Guaranteed compatibility with the standard Ditec Entrematic radio protocols (Dip Switch, Fixed code, Rolling code) and the new Encrypted AES 128-bit and PROTECTED mode protocols.

Thanks to the removable memory module for transmitters, compatibility is guaranteed with the ZEN Manager/ZEN Pad system.

Available in both plug-in and universally pre-cabled versions.

UNIVERSALLY PRE-CABLED VERSION

ZENXR2 - Two-channel universal pre-cabled 433.92 MHz receiver

This two-channel 12-24 V DC receiver, universally pre-cabled in internal or external containers, can be fixed to the wall or placed inside other devices.

Supplied with the removable BIXMR2 memory module for storing up to 200 transmitters.

Equipped with a rigid wire antenna (173 mm long); alternatively, it can be connected to the GOL148REA external antenna

2 relay contacts 1A / 30V (N.O.)

Compatible with the Ditec Entrematic Dip Switch, Fixed code, Rolling code, AES 128-bit Encrypted and PROTECTED mode protocols

PLUGGING INTO A CONTROL PANEL OR A CARD-HOLDING BASE VERSIONS

BIXR2 - Two-channel plug-in 433.92 MHz receiver

Two-channel 12-24 V DC receiver for plugging into a control panel or a card-holding base. Supplied with the removable BIXMR2 memory module for storing up to 200 remote controls.

Compatible with the BIXMR memory module for storing up to 1,000 remote controls.

2 relay contacts 1A / 30V (1NO, 1NO/NC)

1 configurable relay: Step by Step, Impulse, 300 s Timer with toggle, 3 s, 30 s, 90 s and 180 s Timer

Compatible with the Ditec Entrematic Dip Switch, Fixed code, Rolling code, AES 128-bit Encrypted and PROTECTED mode protocols

 

BIXPR2 - Two-channel plug-in 868.35 MHz receiver

Two-channel 12-24 V DC receiver for plugging into a control panel or a card-holding base. Supplied with the removable BIXMR2 memory module for storing up to 200 remote controls.

Compatible with the BIXMR memory module for storing up to 1,000 remote controls.

2 relay contacts 1A / 30V (1NO, 1NO/NC)

1 configurable output: Step by Step, Impulse, 300 s Timer with toggle, 3 s, 30 s, 90 s and 180 s Timer

Compatible with the Ditec Entrematic Dip Switch, Fixed code, Rolling code, AES 128-bit Encrypted and PROTECTED mode protocols

 

BIXLR42 - Four-channel plug-in 433.92 MHz receiver

Four-channel 12-24 V DC receiver for plugging into a control panel or a card-holding base.  Supplied with the removable BIXMR memory module for storing up to 1,000 remote controls.

Configurable output through dip-switch (3 impulsive/stepped outputs + 1 impulsive/timed output).

Compatible with the Ditec Entrematic Dip Switch, Fixed code and Rolling code protocols.

 

 

Compatibility with plug-in receivers

Interested in this product?

Contact us